The sharpened carbide should have a consistent shiny band along the cutting edge. Sharpen Hatchets and Axes With a File You ...

Sharpening nearly anything ... Since the tip is where the tool’s cutting action takes place, it makes sense to hone only there. The tool’s back is honed after the secondary bevel is established.

To sharpen a digging tool such as a shovel or spade, use a medium-toothed file such as a bastard-cut mill file. If possible, clamp the tool in a vise, or have someone else hold the tool down ...

Like any other tool in your arsenal ... you can lower the grinding wheel to the chain in order to sharpen the current cutting tooth. Loosen the vise and slide the chain to line up the next ...

Cutting grass with sharp lawn mower blades is essential to maintaining a healthy, attractive lawn. While sharpening lawn mower blades isn't a job for everyone, it is a straightforward DIY project.

Your lawn mower blades need to be sharpened just like any other blade, but you'll also need to balance them afterward to ...

For this method, you really only need two tools. A flat file, and a “puck” style sharpening stone. The file should be a Mill Bastard file. These are commonly available at any hardware store, and if ...

amateur-friendly tool) for about a month, using it to sharpen knives for cutting meat, vegetables and fruit to see how effective it was. Below, I walk through my experience using it on both new ...