Both use a brass splicing block to connect the wires. But they differ in how they protect the splice. Be sure to closely follow the manufacturer's instructions. With these kits you have only one ...

Wire splicing and soldering is a basic skill that any DIYer can master—but it all starts with a solid connection between the two wires. That’s where the Lineman splice comes in. Connecting two ...

The film mainly concerns the splicing together of rolls of type W110-B field wire, used by the Signal Corps to connect command posts to forward positions, observation posts, and the rear echelons.

The thinking is that a ­soldered connection makes the wire brittle and, due to the natural vibration and movement on a boat over time, prone to failure if it is not backed up by another means.

All aluminum conductors require wire-brushing immediately prior to assembly. Copper and aluminum conductors must not make contact with each other in a terminal or splicing device not specifically ...

Don’t let short electrical wires cramp your DIY project. Splice in extra wire in a few seconds using easy push-in connectors. Electricians should leave at least six inches of wire in wall boxes ...