It'll save you time and frustration. With the door closed and latched, remove the hinge pins by tapping on the bottom of the hinge pin with a nail and hammer. After pins pop up an inch or so ...

TOPIC: Understanding Door-Hinge Design and Effective Door-Removal Techniques OBJECTIVE ... two "C" hinges facing each other with a steel pin holding them together. If you simulate this hinge ...

It fully supports the door, so we were able to remove both the upper and lower hinge pins at once. The dolly's crank raises and lowers the door in small increments and the base tilts, which allows ...

Or you could decide to do the quick fix: Bend the door's hinge pin. Now, you're not going to bend it by much, mind you, just enough to cause a little friction in the hinge. Pop the bottom hinge ...

Q: I have an interior door that is dragging on the bottom. I tried to remove the hinge pins so I can plane off the bottom, but the top pin is stuck. I tried WD-40, tapping with a hammer — how do ...

Some OEM door-hinge pins are retained by E-rings or cotter pins, making their removal trivial. Just pop out the cotter or E-ring, and push the hinge pin out. Ours was swaged into place ...

Whether it's the front-door lock that won't let you into ... the hinges or propping it open with a potted plant, remove one of the hinge pins, lay it on a hard surface, and strike it lightly ...

The most common problem associated with the Fox door hinge is a bad hinge pivot pin and pin bushing or a bad door check roller. Both of these maladies can be repaired with the use of regular ...

Some hinges do have their pins at the bottom so you may have to reverse the process. Make sure you don’t remove every pin at the same time or your door will not have anything to hold onto and ...